Company Products Customers Contact Home





SERIES 500
           
OPTIONS1 OPTIONS2 OPTIONS4  
TECHNICAL
 
Supply and Signal Pressure
1.4 - 1.7 bar g. (20 - 25 psig.) Instrument Air
Max. Supply and Signal Pressure
2 bar g. (29 psig.)
Air consumption
Safe condition - negligable
Unaccepted alarm - approx. 30 Nl/min for each audible alarm.
Accepted alarm - negligable
Standard Temperature Range
0°C to 60°C
Standard Enclosure Ratings
Site Mounted IP42 (IP55 is also available)
Front Panel Mounted IP42
Rack Mounted IP00 (logic) with IP42 or IP55 indicators and pushbuttons
Signal Connections
For 6mm or 1/4" o.d. metal or nylon tube. (Open rack systems use 2mm i.d. tube spigot connectors for front of panel mounted indicators and pushbuttons).
Supply Connections
For 6mm or 1/4" o.d. metal or nylon tube on panel mounted modular units.

For corrosive atmosphere duty, for temperature and IP ratings outside the above specifications, or for alternative indicator colours, please contact HNL Technical Sales.

Single alarm pont pneumatic annunciators are also available as HNL Series 400.

Coding of Series 500 Pneularm

 
5
#
#
#
#
#
#
 
 
Operational Variation:
1
: Auto Reset
3
: Manual Reset
4
: Auto Reset Plus Fleeting Alarm Retention
Mounting Variation:
1
: Enclosed Site Mounted System
2
: Enclosed Front Panel Mounting Module
3
: Open Rack Rear Panel Mounting System
Number of Alarm Points:
4
: 4 points of alarm
8
: 8 points of alarm (See note below)
Unit Type:
C
: Control Unit
A
: Add-on module
Optional Variation:
: 00 through to 09 See Table on Series 500 Options

Note: For Front Panel Mounted Modules the control unit (with pushbuttons) is available only with 4 points of alarm. The Add-on (or extension units) without pushbuttons is available with either 4 or 8 points, except when certain optional variations are required when the limit is 4 points of alarm.
The Site Mounted or Rack Mounted Systems are available with any number of points of alarm.


Page last updated: 17th August 1999 Information from DATA SHEET TD500 PNE