Company Products Customers Contact Home


470 Series

Thermocouple and Resistance Thermometer assemblies with

  • A Protecting Tube.
  • Built up from seamless tubes, fixed or adjustable Flange.
  • Flameproof or weatherproof execution in 316SS or Aluminum.
  • Available with "in head" 2-wire Temperature Transmitter.

Ms Mi Thermocouple or Resistance Thermometer sensor fitted into a terminal head, and provided with or without head extension and a protecting tube would form a typical complete assembly ready for use in the applications, where flow and pressure are not a major concern.

 Protecting tubes are built up from seamless tubes with hot end plugged and TIG welded and a blind Flange is drilled to suit the outer diameter of the tube and TIG welded to it. These are available in standard AISI300 series stainless steels as well as, in exotic materials such as Incoloy 800, Inconel 600,446 SS, and Flanges in ASTM grades A105, A182 and A350 in sizes 3/4" to 2" (DN 20 to DN 50).

The standard execution as shown in this leaflet is with plated CS extension and Aluminium head with conduit entry of 1/2"NPT and Thermocouples with ungrounded junction unless specified otherwise.

No of elements
Elements
Sheath Diameter
Sheath Material
Head Type
No of entries
Well Material
Tube Dimensions

Define

Flange Material

Define

Well Insertion U mm/inches

Define eg. 640mm
Well Extension T mm/inches

Define eg 30mm
Flange size

Options

Select and enter the options required

   

Quantity required:

Expected delivery date:

Your Name: (required)

Company/Organisation Name: (if any) (if applicable)

Company/Residence Address for correspondence:

Phone Number:  (required) 
Fax No.:

Website: (if any)

E-Mail: (required)

In case of any doubt regarding the field values given above, kindly indicate the fields you are doubtful about:

  
Back to Series List