|
|
|
610 Series Thermocouple and Resistance Thermometer assemblies with
|
 |
Ms Mi Thermocouple or Resistance Thermometer sensor fitted into a terminal head, and provided with or without head extension and a protecting tube would form a typical complete assembly ready for use in the applications where flow and pressure are not a major concern.
Protecting tubes are built from seamless tubes with hot end plugged and TIG welded and a blind flange is drilled to suit the outer diameter of the tubes and TIG welded to it. These are available in standard AISI 300 series and stainless steel as well as, in exotic materials such as Incoloy 800, Inconel 600, 446SS, and Flanges in ASTM grades A105, A182 and A350 in sizes 3/4" to 2" (DN20 to DN50).
The standard excution is with plated CS extension and Aluminum head with conduit entry of 1/2" NPT and Thermocouples with ungrounded junction unless specified otherwise. Head Assembly HA-103 is with CS plated extension and N=150.
| Elements | |
| Sheath Diameter | |
| Sheath Material | |
| Head Type | |
| No of entries | |
| Head assembly | |
| Well Material | |
| Tube Dimensions | Define other dimensions |
| Flange Material | Define any other material and grade |
|
Well Insertion U mm/inches OL mm/inches |
Define eg 300mm Define eg 600mm |
| Well Extension T mm/inches |
Define eg 30mm |
| Process Connection | Define Flange size,rating and facing |
| Options |
Select and enter the options required |