TG 320 Series

Thermometer Assemblies with

A Threaded stepped shank or straight & taper shank well.

Safe Design as per ASME PTC 19.3

Weather-proof casing to IP:65,IS:2147

All stainless steel construction as an option

±1% FSD accuracy along measuring range.

Bi-metallic, Mercury or Gas filled thermometers provided with an adjustable connector and a drilled bar-stock threaded well as shown above are used in applications which demand mechanical strength for thermowell & at the same time, faster response to changes in process temperature.

Thermowells are available in standard AISI 300 series stainless steel grades as well as in exotic materials like Incoloy 800, Inconel 600, Monel 400 or Hastelloy alloys B&C.

The assembly shown above is that of a Bi-metallic temperature gauge with thermowell. Mercury or Gas filled gauges can also be supplied if specified.

Gauge Type
Stem Type
Stem Location
Mounting
Dial Size (mm)
Case Material
Stem Material
Stem/Bulb Diameter
Capillary
Capillary Length
Range	Select from Table A eg 0 to 100 degree C required
Well Material
Well Insertion U mm/inches	Define eg 200mm
Well Extension T mm/inches	Define eg 50mm
Process Connection	Select other & enter any other Process Connection
Option	Select from table B

Quantity required:

Expected delivery date:

Your Name: (required)

Company/Organisation Name: (if any) (if applicable)

Company/Residence Address for correspondence:

Phone Number: (required)
Fax No.:

Website: (if any)

E-Mail: (required)

In case of any doubt regarding the field values given above, kindly indicate the fields you are doubtful about:

Back to Series