TG 330 Series

Thermometer Assemblies with

A threaded tapered well.

Safe Design as per ASME PTC 19.3

Weather-proof casing to IP:65,IS:2147

All stainless steel construction as an option

±1% FSD Accuracy along measuring range.

Mercury-in-steel thermometers provided with an adjustable connector and a drilled bar-stock threaded
well as shown above is ideally suited for use in Power plants for use on steam and water services.

ASME PTC19.3 gives a basis for calculating the safe immersion length of thermowells installed on steam & water services. Given the process velocities, our design engineers can arrive at the safe design of thermowell.

The complete assembly can be supplied in SS316 material grade if specified.

Thermowells manufactured as per design shown above are avilable in standard AISI 300 series stainless steel grades such as SS304, SS316 or SS321.

The assembly shown above is that of a mercury-in-steel temperature gauge with thermowell. Bi-metal or Gas filled gauges can also be supplied if specified.

Gauge Type
Stem Type
Stem Location
Mounting
Dial Size (mm)
Case Material
Stem Material
Stem/Bulb Diameter
Capillary
Capillary Length	Define; eg 2000mm
Range	Select from Table A eg 0 to 100 degree C required
Well Material
Well Insertion U mm/inches	Define eg 200mm
Well Extension T mm/inches	Define eg 50mm
Process Connection	Select other & enter any other Process Connection
Option	Select from table B

Quantity required:

Expected delivery date:

Your Name: (required)

Company/Organisation Name: (if any) (if applicable)

Company/Residence Address for correspondence:

Phone Number: (required)
Fax No.:

Website: (if any)

E-Mail: (required)

In case of any doubt regarding the field values given above, kindly indicate the fields you are doubtful about:

Back to Series