|
|
 |
TG 400 Series Thermometer assemblies with
|
Bi-metallic, Mercury or Gas filled thermometers provided with an adjustable connector and a drilled bar stock flanged thermowells forms a typical assembly ready for use in the application designed for.
High velocity collar can be provided to reduce the suspended length of thermowell and to meet ASME PTC 19.3 requirement. Thermowells are available in standard AISI 300 series stainless steels as well as, in exotic materials such as Incoloy 800, Inconel 600, Monel 400 or Hastelloy alloys B&C, and flanges in ASTM grades A105, A182 and A350 and in sizes 3/4" to 2"(DN 20 to DN 50).
The assembly shown above is that of a Bi-metallic temperature gauge with thermowell. Mercury or gas filled gauges can also be supplied , if specified.
| Stem Type | |
| Stem Location | |
| Mounting | |
| Dial Size (mm) | |
| Case Material | |
| Stem Material | |
| Stem/Bulb Diameter | |
| Capillary | |
| Capillary Length | |
| Range | |
| Well Material | |
| Flange Material | |
| Well Insertion U mm/inches |
Define eg 200mm |
| Well Extension T mm/inches |
Define eg 50mm |
| Process Connection |
Select other & enter any other Flange size, rating & facing
|
| Option | Select from table B |
Quantity required:
Expected delivery date:
Your Name: (required)
Company/Organisation Name: (if any) (if applicable)
Company/Residence Address for correspondence:
Phone Number: (required)
Fax No.:
Website: (if any)
E-Mail: (required)