Company Products Customers Contact Home


TG 500 Series

Thermometer Assemblies with

  • A weld-in thermowell.
  • Form D as per DIN 43763.
  • Weather-proof casing to IP:65,IS:2147
  • All stainless steel construction as an option
  • ± 1% FSD Accuracy along measuring range.

Bi-metallic, mercury or Gas filled thermometers provided with an adjustable connector and a drilled bar-stock weld-in well as per DIN 43763 would form a typical assembly ready for use in the application , designed for.

The complete assembly can be supplied in SS316 material grade to resist atmospheric corossion.

Thermowells are available are available in standard AISI 300 Series stainless steel grades or ferritic grade alloy steels such as 13 Cr Mo44 or 13 Cr Mo910

The assembly shown above is that of a Bi-metallic temperature gauge with thermowell. Mercury or Gas filled gauges can also supplied if specified.

Gauge Type
Stem Type
Stem Location
Mounting
Dial Size (mm)
Case Material
Stem Material
Stem/Bulb Diameter
Capillary
Capillary Length
Range

Select from Table A eg 0 to 100 degree C required

Well Material
Well Type
Code for L3,L2,D,d1 diameter

Note:Type D3 and D6 are for 8 dia stem. All other types are for 6 dia stem

.
Option Select from table B

  

Quantity required:

Expected delivery date:

Your Name: (required)

Company/Organisation Name: (if any) (if applicable)

Company/Residence Address for correspondence:

Phone Number:  (required) 
Fax No.:

Website: (if any)

E-Mail: (required)

  
Back to Series